This 3000W microinverter based kit is great for those with small electric bills or who want to shave off a big chunk of their usage. The systems take less than 300ft² of roof space so even a small roof should accommodate the solar modules.
The 225-500kWh generated by these systems is a good amount of energy, enough to offset most of your lighting or even you air conditioning use. The average American uses 920kWh per month. Based on that average this system could provide 24-54% of your usage. If you're a below average consumer, a 3000W system could greatly reduce your electric bill.
Our kits provide all the solar components you need from start to finish.
A typical solar roof mounted system for a home can be installed within 2 days once a permit is obtained from your city or county. After that, it’s just 5 easy steps until you’re producing power from the sun.
Our job is not over until your system is producing clean energy from the sun! We offer you support throughout the installation process with manuals, videos, and technical support.
Any licensed general, electrical or solar contractor can install our solar kits. If you select to hire a contractor to install your solar kit, you should expect to pay approximately $1.00 per watt for labor, wire, conduit, fittings, breakers and other miscellaneous electrical components to complete the solar system installation. For a 3 kW (kilowatt) system, which is 3,000 watts, you can expect to pay $3,000 for installation.
Safer: The system does not employ dangerous, unprotected high DC voltages, eliminating the risk of potential fires as outlined above. The system’s cabling through the roof to your switchboard is regular 240V AC, the same as all other household cabling, and is circuit protected via a circuit breaker in your switchboard.
Shade tolerant and fault redundancy: Each solar panel operates independently, as it has its own dedicated micro inverter. The result is that the system does not suffer from the ‘Christmas light effect’ explained above; one shaded or soiled panel will result in a loss of power from that panel only, and will not drag down the performance of the others. The same goes for any fault; in a conventional DC solar system, a complete failure of a solar panel or central string inverter will usually result in an entire system failure.
Easily expandable: The system size is not ultimately dictated by the capacity of a wall mounted string inverter, allowing for additional panels to be added at any time and only limited by your roof space and budget.
Your Complete Solar Kit is based on the best micro-inverters in the business. These inverters are backed by world class technical & customer support. They come with an unparalleled 25 year warranty that matches the 25 year performance module warranty. One of the best features of the micro inverter is the ability to size your system in 2 module increments.
Call 866-798-4435 to give us details about your house and we can quickly provide a good estimate of how much the kit would produce if installed at the proposed location under proposed tilt and azimuth. You'll need to provide your zip code, your roof tilt and compass heading of the roof pitch.
The APSystems microinverter solution offers intelligent monitoring through the integrated APSystems Communicator, our state-of-the-art Energy Communication Unit, and the APSystems Monitor, our full-featured Energy Monitoring & Analysis software.
The APSystems Communicator, our state-of-the-art Energy Communication Unit (ECU), is the information gateway for our microinverters. The unit collects module performance data from each individual microinverter and transfers this information to an internet database in real time, requiring only a single data and power cable. Through the APSystems Monitor software, the APSystems Communicator gives you precise analysis of each microinverter and module in your solar installation from any web-connected device. The APSystems Communicator’s integrated http webserver offers the simplest and most flexible network integration of any data logger on the market. The user-friendly browser-based interface lets you access your solar array in seconds.
The APSystems Monitor, our robust wireless Energy Monitoring and Analysis (EMA) software, enables comprehensive, web-based monitoring that analyzes and reports the performance of each module in your solar array. This real-time data can be accessed from any web-connected device, anywhere, anytime.
Unlike conventional “string” inverter systems, the APSystems Monitor gives you control over each individual module and microinverter in your solar array, optimizing performance over the system’s lifetime.
Networked with the advanced APSystems Communicator (ECU), the APSystems Monitor (EMA) promptly detects any performance issues in your solar array, pinpointing the location and nature of the problem and providing precise guidance for necessary maintenance, all within our user-friendly graphic interface.
We are America's leading experts in residential home solar kits.
In addition to guaranteed lowest pricing on solar panels, inverters, and racking, we'll help you every step of the way including sizing your system, designing your panel layout, permitting, and interconnection.
Shop with confidence knowing you'll receive free technical support from beginning to end until your system is powered up and you're generating free energy from the sun!
We respect your privacy and your information will not be shared.
Subscribe for green energy tipsand subscriber-only discounts.