6000 Watt (6kW) Solar Ground Mount Kit w/Microinverters

Request a Quote
Solar Permit Service
Solar Financing

Solar Components
Complete Solar Kits
Solar Panels
Grid Tie Inverters

Racks & Mounts
Roof Mount
Ground Mount
Installation Guides
6000 Watt (6kW) Solar Ground Mount Kit w/Microinverters
6000 Watt (6kW) Solar Ground Mount Kit w/Microinverters 6000 Watt (6kW) Solar Ground Mount Kit w/Microinverters 6000 Watt (6kW) Solar Ground Mount Kit w/Microinverters 6000 Watt (6kW) Solar Ground Mount Kit w/Microinverters 6000 Watt (6kW) Solar Ground Mount Kit w/Microinverters
Total System Cost: $12,423.60

Pay Only $132.93 per month!
Zero down financing, Eligible for 30% Federal Tax Credit

Order Qty:
Item will be shipped by freight, shipping charges apply.

Is this solar panel kit right for me?

For half the homes in the United States this 6000 Watt microinverter based kit is more than enough to completely eliminate their bill. You'll need the roof space though. The modules will occupy about 460ft2 of roof space. Luckily with microinverters the modules can be placed anywhere, they don't have to be grouped all together.

The average American uses 920kWh per month. Based on that average this system could provide 49-99% of your usage and reduce your bill to almost ZERO. If you're an average consumer of electricity (920kWh/month), a 6000W system could probably give you the ticket to electric bill freedom.

A 6kW Solar Kit requires up to 450 square feet of space. 6kW or 6 kilowatts is 6,000 watts of DC direct current power. This could produce an estimated 400 to 1,000 kilowatt hours (kWh) of alternating current (AC) power per month, assuming at least 5 sun hours per day with the solar array facing South. The highest output will be achieved with an unobstructed south-facing view of the sun for maximum solar power. The actual power generated will vary based on location, equipment and installation factors. Refer to your electric utility bill to find the actual kWh used per month and compare it to how much power these low cost 6kW PV systems can generate.

What is included in my 6kW solar installation kit?

Our kits provide all the solar components you need from start to finish.

GigaWatt 255W Solar Panels APS Solar Microinverter Ironridge solar racking
GigaWatt 255 Watt Solar Panels APSystems YC500A Grid-Tie Microinverters Ironridge Racking and Mounting

  • Solar Panels - 20 x 255W high performance 60-cell polycrystalline PV modules with 25 year warranties.
  • Micro Inverters - 24 x efficient APSystems micro-inverters that connect two PV modules per inverter.
  • Racking and Attachments - Industry leading IronRidge ground racking mounts the solar panels on the ground.
  • System Monitoring - Free with every kit purchase! View and analyze your solar energy production in real-time.
  • System Design and Financial Analysis - We'll custom engineer this system for your home and calculate the payback on your solar investment.
  • Not Included - Wire, conduit, fittings, breakers, AC/DC Disconnects (if required), junction boxes and a sub panel (if required). All these items can be purchased at any electrical supply shop, Home Depot or Lowes, and will typically cost $300 to $500. Our technical support representative will provide a shopping list once your plans are complete.

How easy is it to install?

  • You can install a 4kW ground-mounted solar system in one or two weekends.
  • Our kits use industry leading solar panels, inverters, and racking systems specifically selected and combined to make do-it-yourself installation possible.
  • A homeowner who has wired an AC outlet and is comfortable working with electricity can install our Solar kit.
  • The micro-inverters in our kits have significantly improved the safety of installing a solar panel system by generating standard AC power instead of dangerous DC power.
  • Micro-inverters allow you to have as few or as many panels as you like and to easily expand your system later. They simplify installation as well as allowing monitoring of each module independently. Since each panel is an individual system they maximize the power output from each panel resulting in an average 15% increase in power generation per panel.
  • If self-installation is not for you, we can help you find a local solar contractor to help you with the process.

What is the installation process?

A typical solar ground-mounted system for a home can be installed within one or two weekends once a permit is obtained from your city or county.  After that, it’s just 5 easy steps until you’re producing power from the sun.

  1. Take your plan set to your city or county and apply for a permit to install. The plan review process can take up to 10 days. Once the city or county approves your plans and issues your permit you may begin installing your solar system.
  2. First, the racking and mounting system must be installed. This is the most laborious process of the solar installation process. You have to dig deep holes and pour concrete.
  3. Once the racking and mounting system is secured in the ground, the solar panels and inverters can be quickly installed. The inverter(s) are then tied into the grid through a dedicated breaker in your main service panel.
  4. When the installation is complete, your city or county inspector must sign off on it. You can accomplish this by scheduling an inspection meeting with them.
  5. Lastly, you must send the final job card, interconnection paperwork, and your net metering agreement to your utility. They will then grant you Permission to Operate. It can take up to 4 weeks after passing inspection for your utility to provide you Permission to Operate. With our interconnection service we will process all the paperwork for you.

Our job is not over until your system is producing clean energy from the sun! We offer you support throughout the installation process with manuals, videos, and technical support.

How much should I pay a contractor to install the solar kit?

 Any licensed general, electrical or solar contractor can install our solar kits. If you select to hire a contractor to install your solar kit, you should expect to pay approximately $1.00 per watt for labor, wire, conduit, fittings, breakers and other miscellaneous electrical components to complete the solar system installation. For a 4 kW (kilowatt) system, which is 4,000 watts, you can expect to pay $4,000 for installation.

Why Choose Grid-Tie Microinverters?

MicroInverter Advantages

Safer: The system does not employ dangerous, unprotected high DC voltages, eliminating the risk of potential fires as outlined above. The system’s cabling from your solar system to your switchboard is regular 240V AC, the same as all other household cabling, and is circuit protected via a circuit breaker in your switchboard.

Shade tolerant and fault redundancy: Each solar panel operates independently, as it has its own dedicated micro inverter. The result is that the system does not suffer from the ‘Christmas light effect’ explained above; one shaded or soiled panel will result in a loss of power from that panel only, and will not drag down the performance of the others. The same goes for any fault; in a conventional DC solar system, a complete failure of a solar panel or central string inverter will usually result in an entire system failure.

Easily expandable: The system size is not ultimately dictated by the capacity of a wall mounted string inverter, allowing for additional panels to be added at any time and only limited by your space and budget.

Your Complete Solar Kit is based on the best micro-inverters in the business. These inverters are backed by world class technical & customer support. They come with an unparalleled 25 year warranty that matches the 25 year performance module warranty. One of the best features of the micro inverter is the ability to size your system in 2 module increments.

Call 866-798-4435 to give us details about your house and we can quickly provide a good estimate of how much the kit would produce if installed at the proposed location under proposed tilt and azimuth. You'll need to provide your zip code, your solar panel tilt and compass heading of the solar panel pitch.


Free System Monitoring

The APSystems microinverter solution offers intelligent monitoring through the integrated APSystems Communicator, our state-of-the-art Energy Communication Unit, and the APSystems Monitor, our full-featured Energy Monitoring & Analysis software.

The APSystems Communicator (ECU)

The APSystems Communicator, our state-of-the-art Energy Communication Unit (ECU), is the information gateway for our microinverters. The unit collects module performance data from each individual microinverter and transfers this information to an internet database in real time, requiring only a single data and power cable. Through the APSystems Monitor software, the APSystems Communicator gives you precise analysis of each microinverter and module in your solar installation from any web-connected device. The APSystems Communicator’s integrated http webserver offers the simplest and most flexible network integration of any data logger on the market. The user-friendly browser-based interface lets you access your solar array in seconds.


  • Collects individual module and microinverter statistics
  • Communicates in real time
  • Requires no additional wiring

The APSystems Monitor (EMA)

The APSystemsMonitor, our robust wireless Energy Monitoring and Analysis (EMA) software, enables comprehensive, web-based monitoring that analyzes and reports the performance of each module in your solar array. This real-time data can be accessed from any web-connected device, anywhere, anytime.

Unlike conventional “string” inverter systems, the APSystems Monitor gives you control over each individual module and microinverter in your solar array, optimizing performance over the system’s lifetime.

Networked with the advanced APSystems Communicator (ECU), the APSystems Monitor (EMA) promptly detects any performance issues in your solar array, pinpointing the location and nature of the problem and providing precise guidance for necessary maintenance, all within our user-friendly graphic interface.


  • Monitors and allows analysis of each solar module and microinverter
  • Allows remote access to the solar array
  • Shows performance issues and alerts the user to inverter events
  • Communicates in real time
  • Graphs system solar output over time to boost troubleshooting

GoGreenSolar Customer

Why Choose Us?

We are America's leading experts in residential home solar kits. In addition to guaranteed lowest pricing on solar panels, inverters, and racking, we'll help you every step of the way including sizing your system, designing your panel layout, permitting, and interconnection.

Shop with confidence knowing you'll receive free technical support from beginning to end until your system is powered up and you're generating free energy from the sun!

Call (866) 798-4435 for Expert Help
First Name *
Last Name *
Email *
Phone *
Zip *
How can we help you? *

We respect your privacy and your information will not be shared.

Related Products