Apollo Solar ISM 120/240 Inverter Switch Gear
Apollo Solar ISM 120/240, Inverter Switchgear Module w/250A DC breaker and 3-40A-2 pole 120/240VAC breakers. Pre-wired.
The entire electronics for a battery based PV system in a single enclosure for quick, easy installation. The Apollo Solar ISM 120/240 comes factory assembled with the Inverter Breakers for DC input and AC input / output / bypass breakers, ready to add breaker Pacs from Apollo Solar for Charge Controller, GFP and Generator / Grid Selector. Thus, the AC and DC disconnects, bus bars, shunt and connectors are in a single enclosure. The installer need only connect the PV Input, Battery Cables, AC Load, and optional AC Line/Generator Input from the outside, providing a complete plug-and-play solar power switchgear package.
Features:
Save time on every installation
Small footprint: 11” wide, 15” tall, 7”deep
Modular design – one ISM per inverter
UL1741 certified, NEC compliant
Inverter / battery breaker included
Slots for 18 DIN rail ½” wide breakers:
• DC Breakers for Charge Controller
• GFP on PV input
• AC Breakers and bypass for Inverter
• AC Generator / Grid input selector
Fits all Apollo Solar Inverters: TrueSineWave™ TSW3224 and TSW4048
Fits all Apollo Solar T80 or T80HV TurboCharger™ Charge Controllers
Lower Costs Using a Factory-Built Appliance
The ISM can provide 240/120VAC split phase, 120VAC single phase or 230V AC power for the global market with the selection of our available AC Circuit Breaker Pacs. The ISM is easily installed into tight spaces while enabling the Apollo Solar TSW Inverters and TurboChargers™, thus providing a complete power center with PV input.
Simply Connect PV Input, Battery Cables & AC
The wiring box has clearly labeled connectors for the PV array input, the battery cables, and a second bypass toggle space is provided for optional generator input.
The ISM 120/240 Ships Fully Assembled with:
Powder coated aluminum cabinet and mounting hardware
Three 40Amp, 120/240 VAC, two-pole, DIN-rail breakers for AC input, inverter bypass, and AC output to load
One F frame 250A 3/8” stud inverter DC input breaker
One ground bus bar
One AC neutral bus bar
One system negative terminal bus bar
One battery positive terminal bus plate
One 500Amp/50mV shunt
AC input and output wires (THHN) for the TSW Inverter
Room to expand – total knock-out positions for 18 single pole ½” (13mm) wide DIN rail AC or DC breakers
Specifications
Battery Voltages: 24 or 48 VDC nominal
PV Input Range with T80: Up to 70 Amps, 16 to 112VDC operating. 140VDC Max Open Circuit Voltage
PV Input Range with T80HV: Up to 70 Amps, 24 to 160VDC operating, 200VDC Max Open Circuit Voltage
Data Comm Options: ASNET Apollo Network available for optional Remote Displays and Internet Gateway
Connectors:
- PV input: Distribution Block accepts #14 to #2
- AC: Terminals accept #14 to #6
- Battery Terminals: 3/8” hex bolts accept up to a pair of #4/0 AWG cables lugs
Unit Dimensions (H x W x D): 15“ x 11“ x 7.25“ (381 x 280 x 184mm) / Shipping: 19” x 12” x 11”
Weight: Unit: 11 lbs. (4.8 kg) / Shipping weight: 16 lbs. (7.1 kg)
Environmental Rating: Indoor Type 1
Optional Accessories: AC Breakers for 120 VAC and for 230 VAC, DC Breakers and GFP pacs for the T80 and for the T80HV Charge Controllers, Remote Monitor, Generator Selector
