ProSolar SolarWedge, 15° w/ 1 ea., 3" Lower & 15.5" Upper Post - SW15-1
SolarWedge by Professional Solar Products, Inc. is an innovative low profile PV mounting system. The system provides an easy to install and economical solution for installations requiring a 5, 10 or 15 degree fixed angle. SolarWedge™integrates with Professional Solar's patented "top-down" commercial Roof Trac and FoamJack stanchion products. The system dramatically lowers installation and shipping costs while optimizing installed wattage on the roof.
Revolutionary commercial mounting system
Advantages:
* Easy handling and Installation: Each box supports up to 30' (front & rear) of Roof Trac support rails (2.5" deep channel support rail required for SolarWedge 6' O.C. installation)
* Integrated leveling system: Compensates up to 2-1/2" of roof variation using an included 1/2" x 4" stainless steel stud
* Fully engineered: Load tested to 30 lbs. per sq. ft (approx. 110 mph wind load) at up to 6' centers
* Finished aluminum parts: Clear anodized angled support brackets match support rail. FoamJack stanchion parts are machine tumbled and cleaned to provide excellent bonding of foam, flash or sealants
* Roof friendly: System does not affect roof drainage, allows roof to breathe and dry out; provides walking access around the modules for easy service and accessibility to the roof
Characteristics:
Orientation:
Clamps engaged on long side of the module
Spans:
Up to 6' on center
Materials:
Clamps & leveling support: Anodized Aluminum
Foam Jack: Tumbled aluminum
Stainless Steel Hardware
Engineering:
30 lbs. per ft.2 (module and setup specific)
110 mph approximate wind loading
Professional Solar - SolarWedge:
SolarWedge Installation Guide:
