Quick Mount PV Shake Mount Flashing Bronze Anodized Finish, QMLC B

QuickMount, Flashing, Shake Mounts, 18" x 18", Bronze, Qty. 1, QMLC B 1

Quick Mount PV Shake Mount Flashing Bronze Anodized Finish, QMLC B is designed to be adaptable, Quick Mount PV's 18 x18-inch flashing installs on East Coast style shake roofs (7.5-inch exposure over skip sheeting) and West Coast (10-inch exposure over solid sheeting) alike. The flashing slides quickly into place with no need to modify the shake to force a fit. Just a simple, watertight seal every time.

Quick Mount PV's Shake Roof Mounts are constructed of corrosion resistant material, including .050 aluminum flashing and stainless steel hardware, which last at least three times longer than galvanized parts. Our Shake Mounts bolt to any racking system with an L-foot interface, and integrate directly with Prosolar and Unistrut systems, as well.

This is the shake mount. It is shown in a bronze anodized finish. It is available in; mill finish, bronze anodized finish, and clear anodized finish. It works with any rack that utilizes an L foot, as well as pro-solar and uni-strut. The flashing is 18″ × 18″. 5″ × 18″ is exposed, 10″ × 18″ is under the next row of shakes, and 3″ × 18″ is under the second shake above as well as under the tar paper.

It is imperative to place the flashing under the tar paper to maintain a waterproof installation. It is simplest to remove the shakes directly above to both; find the rafter, as well as insure the flashing gets under the tar paper, then reset the removed shakes.

Sold in boxes of 12 flashings – QMLC B