Pricing does not include freight shipping. Request a shipping quote and get a free roof layout.
Adding product to your cart
The IQ7A micro inverter from Enphase are designed to handle 295 to 490 watt solar panels. The IQ7A is compatible with 60-cell and 72-cell solar panels.Peak output power 366 VA @ 240 VAC and 295 VA @ 208 VAC
Model
IQ7A-72-2-US
Series
IQ7
Manufacturer
Enphase Energy
Mechanical
Type
Grid Tie - Micro Inverter
Ambient Temperature Range
-40°C to +65°C
Approved for wet locations
Yes
Enclosure
Class II double-insulated, corrosion resistant polymeric enclosure
Environmental category / UV exposure rating
NEMA Type 6 / outdoor
Cooling
Natural Convection - No fans
Connectors
MC4 (or Amphenol H4 UTX with additional Q-DCC-5 adapter)
Dimensions (W x H x D)
8.35" x 6.89" x 1.19" (without bracket)
Weight
2.38 lbs
Shipping Method
Ground
Input (DC)
Commonly used module pairings: Recommended PV Power (STC)
295 W–460 W +
Module compatibility
60-cell and 72-cell PV modules
Max Voltage
58 V
Maximum input DC current
10.2 A
Peak Power Tracking Voltage
38 V - 43 V
Operating Range
18 V - 58 V
Min/Max Start Voltage
30 V / 58 V
Max DC short circuit current (module Isc)
15 A
Overvoltage class DC port
II
DC port backfeed under single fault
0 A
PV array configuration
1 x 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch circuit
Output (AC)
Peak Output Power
295 VA
Maximum continuous output power
290 VA
Nominal (L-L) voltage/range²
240 V / 211-264 V 208 V / 183-229 V
Maximum continuous output current
1.45 A @ 240 V 1.39 A @ 208 V
Nominal frequency
60 Hz
Extended frequency range
47 - 68 Hz
AC short circuit fault current over 3 cycles
5.8 Arms
Power factor at rated power
1.0
Maximum units per 20 A branch circuit
11 (240 VAC) 11 (single-phase 208 VAC)
Overvoltage class AC port
III
AC port backfeed under single fault
0 A
Power factor setting
1.0
Power factor (adjustable)
0.7 leading ... 0.7 lagging
Features
High Power
Peak output power 366 VA @ 240 VAC and 295 VA @ 208 VAC
Easy to Install
Lightweight and simple
Faster installation with improved, lighter two-wire cabling
Optimized for high powered 60-cell and 72-cell modules
Highest CEC efficiency of 97%
More than a million hours of testing
Class II double-insulated enclosure
UL listed
Smart Grid Ready
Complies with advanced grid support, voltage and frequency ride-through requirements
Envoy and Internet connection required
Configurable for varying grid profiles
Meets CA Rule 21 (UL 1741-SA)
Detailed Desription
The high-powered smart grid-readyEnphase IQ 7A Micro™ dramatically simplifies the installation process while achieving the highest system efficiency for systems with 60-cell and 72-cell modules.
Part of the Enphase IQ System, the IQ 7A Micro integrates with the Enphase IQ Envoy™, Enphase IQ Battery™, and the Enphase Enlighten™ monitoring and analysis software.
The IQ Series Microinverters extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty of up to 25 years.
Also known as:
IQ 7A-72 IQ7A72 IQ 7A
Customize My Box
We'll custom design this system for you and calculate how many solar panels you need to meet your goals.
Our engineers use state-of-the-art software to conduct a PV analysis and draft a free layout of solar on your roof, included with our complimentary quote.
Fill out the form for a complimentary solar quote that includes a custom solar panel layout using satellite technology and a breakdown of solar energy production, federal tax credit and energy offset.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.