For half the homes in the United States this 20,020 Watt microinverter based kit is more than enough to completely eliminate their bill. You'll need the roof space though. The modules will occupy about 1,155ft² of roof space. Luckily with microinverters the modules can be placed anywhere, they don't have to be grouped all together. The average American uses 920kWh per month. Based on that average this system could provide 49-99% of your usage and reduce your bill to almost ZERO. If you're an average consumer of electricity (920kWh/month), a 20kW system could probably give you the ticket to electric bill freedom.
An 20kW Solar Kit requires up to 1,000 square feet of space. 20kW or 20 kilowatts is 20,000 watts of DC direct current power. This could produce an estimated 450 to 1,200 kilowatt hours (kWh) of alternating current (AC) power per month, assuming at least 5 sun hours per day with the solar array facing South. The highest output will be achieved with an unobstructed south-facing view of the sun for maximum solar power. The actual power generated will vary based on location, equipment and installation factors. Refer to your electric utility bill to find the actual kWh used per month and compare it to how much power these low cost 20kW PV systems can generate.
Our easy DIY kits provide all the solar components you need from start to finish.
A typical solar roof mounted system for a home can be installed within a few days once a permit is obtained from your city or county. After that, it’s just 5 easy steps until you’re producing power from the sun.
Our job is not over until your system is producing clean energy from the sun! We offer you support throughout the installation process with manuals, videos, and technical support.
Any licensed general, electrical or solar contractor can install our solar kits. If you select to hire a contractor to install your solar kit, you should expect to pay approximately $1.00 per watt for labor, wire, conduit, fittings, breakers and other miscellaneous electrical components to complete the solar system installation. For a 20 kW (kilowatt) system, which is 20,000 watts, you can expect to pay $20,000 for installation. If needed, we can assist you with finding a contractor.
Yes! As a licensed C-10 electrical contractor based in Orange County, we also provide complete solar installation for residential homes in California at highly competitive pricing. Sit back and enjoy a complete turn-key solar installation at lower rates than other solar companies.
Safer: The system does not employ dangerous, unprotected high DC voltages, eliminating the risk of potential fires as outlined above. The system’s cabling through the roof to your switchboard is regular 240V AC, the same as all other household cabling, and is circuit protected via a circuit breaker in your switchboard.
Shade tolerant and fault redundancy: Each solar panel operates independently, as it has its own dedicated micro inverter. The result is that the system does not suffer from the ‘Christmas light effect’ explained above; one shaded or soiled panel will result in a loss of power from that panel only, and will not drag down the performance of the others. The same goes for any fault; in a conventional DC solar system, a complete failure of a solar panel or central string inverter will usually result in an entire system failure.
Easily expandable: The system size is not ultimately dictated by the capacity of a wall mounted string inverter, allowing for additional panels to be added at any time and only limited by your roof space and budget.
Your Complete Solar Kit is based on the best micro-inverters in the business. These inverters are backed by world class technical & customer support. They come with an unparalleled 25 year warranty that matches the 25 year performance module warranty.
Call 866-798-4435 to give us details about your house and we can quickly provide a good estimate of how much the kit would produce if installed at your zip code under proposed tilt and azimuth.
The Enphase IQ Envoy enables remote system monitoring and update capabilities for Enphase IQ microinverter systems. The IQ Envoy communicates with IQ microinverters, transmitting performance and production data which can be viewed either directly from the IQ Envoy or online from any internet-connected device. The IQ Envoy is easy to install with integrated Wi-Fi and ethernet connection options. Enphase also offers cellular data plans for monitoring sites where an internet connection isn’t available. The IQ Envoy is capable of revenue-grade metering and meets ANSI C12.20 standards.
Meet the Envoy, the brains of the Enphase Home Energy Solution. Between collecting real-time data from your microinverters and delivering remote updates back out to them, the Envoy keeps your entire system in constant communication.
Thanks to the Envoy, Enphase brings you more than solar. We bring you a connected home.
Today, that means ease, insights, and reliable solar energy. Tomorrow, it’s the intelligence to adapt to changing grid requirements, via automatic remote updates that Envoy downloads and pushes out to your microinverters.Energy you can count on, today and into the future. That's Energy Evolved.
* All prices, specifications and availability subject to change without notice. Contact us for most current information. Sale prices, rebates, or discounts may not be eligible with certain promotions.
We are America's leading experts in residential home solar kits.
In addition to guaranteed lowest pricing on solar panels, inverters, and racking, we'll help you every step of the way including designing your system, permitting, interconnection and installation.
Shop with confidence knowing you'll receive free technical support from beginning to end until your system is powered up and you're generating free energy from the sun!
We respect your privacy and your information will not be shared.
Subscribe for green energy tipsand subscriber-only discounts.